Baby-LIN-MB-II
Product description
The Baby-LIN-MB-II is a modular RS-232/Ethernet to LIN- and CAN-Bus gateway, which allows to control LIN- or CAN-Bus driven ECU’s from any host (e.g. PLC) equipped with RS232 or Ethernet.
- The Baby-LIN-MB-II features slots for up to 2 piggyback extensions. These MIF (mounted interface) extensions allow a modularisation of the device
- MIF-LIN: adds 2 additional LIN-Bus interfaces
- MIF-DIO: adds 6 shared digital inputs/outputs
- MIF-CAN-FD: adds 2 optional CAN-FD interfaces
Technical Specifications
Device
- Power supply: 8-32 VDC
- Power supply via 3 pin connector (MC 1,5/ 3-ST-3,81)
- Integrated UPS (uninterruptible power supply)
- Discharge duration: about 2 seconds
- Inrush current: 1,22 A
- 2 LEDs: Signal device states
- 6 bicolor LEDs: Signal bus and error states
- 2 device specific push buttons
- CPU: ARM Cortex-A5, 528 MHz
- Memory: 256 MB DDR-RAM
-
Galvanic isolation of all communication interfaces (LIN- and CANBus, Ethernet, RS-232, Digital I/O)
Exception: The supply and ground lines of all LIN-Channels are connected respectively with each other to reduce the number of lines. This configuration can be changed via jumpers
Interface: LIN
- 1 LIN-Bus interface available by default
- 1 LIN-Bus interface optionally available on hardware but not activated, voucher code required
- 4 LIN-Bus interfaces available through hardware modules, additional hardware extensions required
- LIN-Bus connection via 25 pin Sub-D connector
- LIN-Bus supply voltage: 8-26 VDC
- LIN-Bus baud rate: up to 115,200 Baud (Support of protocols outside of the LIN specification)
- Switched LIN supply output
- Supported LIN versions: V1.2, V1.3, …, V2.2
- Supported LIN related protocols: Cooling and SAE J2602
- Maximum signal cable length for LIN-Bus: 30m
Interface: LIN
- 1 CAN-Bus as high speed interface (CAN-HS) available on hardware but not activated, voucher code required
- CAN-HS-Bus connection via 25 pin Sub-D connector
- Maximum baudrate: CAN-HS: 1 MBit/s
- Switched LIN supply output
- Maximum signal cable length for CAN-Bus: 30m
Interface: USB Host
- USB 2.0 interface via USB 2.0 type A connector
- Max current: 500 mA
- Supported file system: FAT-32, FAT-16
Interface: Ethernet
- Command protocol: TCP-IP socket on port 10002
- Ethernet via RJ-45 connector
- Transfer rate: 10/100 Mbit
- Auto MDI-X feature
- Web interface for device events, system information as well as easy SDF upload
Interface: RS232
- Serial connection via Sub-D-9 female connector
- Data rate: 9600 Baud
- Data bits, parity bit, stop bit: 8-N-1
Interface: Digital I/O
- 1 digital input
- electrically isolated digital output (0V – 24V, max. 190mA)
- 1 switchable power output (12 V- 30 V, Max. 700 mA)
- Digital I/O available via Sub-D-25 female connector
Interface: CASE
- Degree of protection: IP20
- Operating temperature: -20° – + 60° Celsius.
- Weight: 440 g
- Case dimensions [mm]: 124 x 104 x 54 (L x W x H) Elements like connectors, buttons, and the top hat rail mounting adapter are not included
- Mounting: Top hat rail (TS 35)